INSTALL INSTRUCTIONS C-TCB-27
DODGE RAM 1500 PICK-UP 2002-2007
DODGE RAM 2500 & 3500 PICK-UP 2003-2007
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE:
QTY DESCRIPTION
PART #
1
1
1
Pole support assembly
Telescoping pole assembly
Lag bolt ¼ x 1
CM93071-27W
CM93072-3
GSM33060
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
Telescoping pole
assembly
1. Confirm receipt of all hardware and components.
2. Remove front inner and outer passenger seat bolts on
vehicle.
INSTALLATION:
1. MOUNT C-TCB-27 INTO VEHICLE:
• Position pole support assembly on top of
passenger seat base mount and align holes in
pole support assembly with holes in seat base.
• Loosely attached factory seat bolts that were
removed during sub assembly.
Pole support
assembly
•
Tighten down factory passenger seat bolts and
5/16-18-nylock nut holding side support brace
to pole support assembly.
• Mount optional C-3090, computer-mounting
platform, to telescoping pole assembly using
hardware and instructions provided with
C-3090.
Location of
passenger side factory
seat base bolts
C-TCB-27-INST-3-07
|
AllerAir The 6000 EXEC User Manual
Briggs Stratton 313700 User Manual
Briggs Stratton 421700 User Manual
Briggs Stratton Automobile Parts 235400 User Manual
Brother MFC 830 User Manual
Fisher Price P9042 User Manual
Garmin ARTISAN 725 User Manual
GE ASQ10 User Manual
Honda Automobiles 08R80 MCH 300C User Manual
HP Hewlett Packard OfficeJet LX User Manual